Merf 3.2 [GATE]

USD022

Usado

USADO MAS A FUNCIONAR SEM ALGUM PROBLEMA

VAI COM TUDO O QUE ESTÁ NA FOTO

Mais detalhes

1 Item

Aviso: Últimos itens disponíveis!

35,00 € com IVA

Pagamento Seguro
Pagamento Seguro

Mais informação

Terceira geração de Mosfets. Ele tem 10 funções. O mais recente é o modo de 3rd burst. O sistema evita a perda de energias e protege as baterias Li-Ion: lipoly e LiFePO4. Tem Active Brake e protege a sua AEG, eliminando o gatilho burn-out. Smart Trigger permite uma resposta mais rápida do gatilho com a mesma taxa de fogo. Graças a dois modos de funcionamento, o sistema trabalha com uma instalação padrão e modificado. Nenhuma modificação na sua AEG é necessária. O circuito é compatível com a maioria das armas de airsoft, incluindo armas com Upgrades. Funciona com as molas mais fortes (incluindo M170).

Funcões:

1. MOSFET
2. Active Brake
3. Proteções para baterias Li-Poly/Li-Ion/LiFePO4/NiCd
4. Proteção contra curto-circuito
5.Proteção de Sobreaquecimento
6. Programação
7. Controle de ROF
8. Modo burst 3-rd
9. Smart Trigger
10. Modos de funcionamento:
- Modo simples. Nenhuma modificação na AEG é necessária.
- Modo Avançado. Gatilho conectado ao sistema.

Características:

1. O sistema funciona correctamente em uma vasta gama de tensões de 3,2-15V
2. Compatibilidade com as mais fortes réplicas AEG
3. instalação simples
4. proteção total
5. Consumo de energia muito baixo em stand-by (0,15 mA)
6. Muito baixa resistência (2,4 mohms)
7. Compatível com todos os tipos de gearbox
8. Display 4 LED
9. Deans T-conectores

Included in the kit:

  • MERF 3.2
  • Additional kit of Deans-T Connectors
  • Single signal wire for trigger contacts
  • Double signal wire for trigger contacts
  • Programming button

Key functions

mosf.png

MOSFET

Do you want to achieve a higher rate of fire and faster trigger response? Are you planning a power upgrade of your rifle? In that case, you need a MOSFET.
It targets the energy from the battery directly to the motor, bypassing the mechanical trigger contacts. As a result, you gain a higher rate of fire of the rifle and a faster trigger response, and the contacts are protected against burn out.



act-bra.png

ACTIVE BRAKE

Do you care about realism? Would you like to increase the life of the gearbox? Does your rifle have such a high rate of fire that you are not able to make a single shot? The Active Brake sorts things out. In SEMI Mode, the brake does not allow for compressing a piston after a shot. The piston will stop in the front position which eliminates unnecessary stresses, increasing the service life of the gearbox and its parts. This is important, especially with an AEG power upgrade. After releasing the trigger, the rifle immediately stops firing. So, you gain more realism and, additionally, you do not waste your precious ammunition.



ele-fuse.png

ELECTRONIC FUSE

We know how important reliability is on the battlefield. That’s why the unit has thermal protection. In tandem with a time-lag fuse, it fully protects your AEG installation.



bat-pro.png

BATTERY PROTECTION

Protection against Over-Discharge of the Battery. Modern LiPo and LiFe batteries are very sensitive to over-discharge. If you do not want to damage the battery and you care about its service life, this protection is indispensable. The microprocessor monitors the battery voltage constantly. When the voltage drops down to a critical level, the Controller will not allow firing.



deb.png

Debouncing (Digital Interface)

This provides full compatibility with the micro-switches. It is fully resistant to contact bounce. You gain a bigger ROF, a faster trigger response and your MOSFET is less prone to heating.



3rd-gen-mos.png

3RD GENERATION MOSFET

The advent of modern transistors and microcontroller has enabled us to create the smallest and most reliable AEG Controller on the market.

rof-con.png

RATE OF FIRE CONTROL

This ensures there is no loss of the rifle’s rate of fire, so you can use stronger LiPo batteries, and still have ROF just like in a real gun.



sma-tri.png

SMART TRIGGER

We know how vital the fast trigger response is during combat. This is why we have developed the Smart Trigger function. It enables you to achieve a faster trigger response. It works with the ROF Control system. During the first shot, the microprocessor sets the ROF Control to 100%. After the first shot, it switches to a previously programmed value (e.g. 50%). As a consequence, the first shot is fired at a full rate of fire, and subsequent shots at a reduced ROF. The best results can be achieved by using a battery with a higher than standard voltage. For example, if you use a 7.4V battery, you can replace it with 11.1V. In this way, you will achieve a faster trigger response with the same rate of fire as with a standard battery. The Smart Trigger is most effective when the Burst time is set at 3 rounds.



3rd-bur.png

3RD BURST

Burst mode enables you to make 3-shot series. In this way you can save ammunition and increase the realism. You can change AUTO mode to BURST mode or SEMI* mode to BURST mode.

If in SAFE/SEMI/BURST mode you release the trigger earlier, you can make one or two shots. The burst time is set in the menu with accuracy to 4ms. The processor actively compensates for the change in burst time with a decrease in the rate of fire due to battery discharging.

*SEMI to BURST in enhanced mode only



con-fir-sel.png

CONFIGURABLE FIRE SELECTOR

The function gives you the option to program your fire selector. There are five modes:

- STOCK WIRING SEMI/AUTO
- STOCK WIRING SEMI/BURST
- MODIFIED WIRING SEMI/AUTO
- MODIFIED WIRING SEMI/BURST
- MODIFIED WIRING BURST/AUTO



plug-play.png

Operating Modes

You can connect the system to a rifle in two ways. Depending on the selected method, you should set a proper operating mode: Plug&Play or Enhanced

Plug&Play: All you need to do is connect the system between the battery and the rifle.

Enhanced Mode: It requires modification of AEG installation. We connect trigger contacts to
MERF 3.2. We can do it using the signal wire attached to the kit.